Company Info


Home > Test Fittings
Sort By:
Page of 2
1/4" Hard Anodized Aluminum Backflow Test Fittings - Set of 3
1/4" Hard Anodized Aluminum Backflow Test Fittings - Set of 3
Our Price: $26.95

My fittings are the best quality fittings you can buy and are made in the United States. These look the same as the previous 1/4" aluminum backflow test fittings except the color is darker, but that's were it stops as the Hard Anodizing absorbs into the Aluminum and creates a surface that is only second to diamond in hardness.
There is no reason to spend the extra money on brass fittings. These should out wear the brass fittings at less cost and less weight plus the color makes them easier to see so your less likely to leave them behind.
Also my new fittings have a larger O-ring as you can see in the photo and a recessed groove in the fitting for the o-ring to sit in which makes sealing easier. The space capsules are made out of aluminum that is not much thicker than a piece of paper to save weight. To give them the strength they need for takeoff and reentry they hard anodize the aluminum.
.
QT125B - Set of 3 (1/4")  Brass Backflow Quick Test Fittings
QT125B - Set of 3 (1/4") Brass Backflow Quick Test Fittings
Our Price: $29.95

Set of (3) 1/4" Brass Backflow Quick Test Fittings. My fittings are the best quality fittings that are made. I am the original designer of the quick test fittings and worked to improve them through the years. The other companies are still using the original design that they copied from me. The thickness of the o-ring has been increased and the groove it sits in has been changed which leads to easier sealing. Made in the United States so I can keep control of the quality of the fittings.

Set of 3 -1/4" EZ Test Aluminum Backflow Fittings
Set of 3 -1/4" EZ Test Aluminum Backflow Fittings
Our Price: $29.95

Set of 3 -1/4"New Easy Test Backflow Fittings. These are totally different from anything else on the market. These fittings seal on the bottom seat in the test cock so no water even gets to the threads. These are only available in the 1/4" size till about the middle of March when I will have all 3 sizes available. They are only available in Hard Anodized aluminum, which will make them stronger than the brass and much less weight and cost. Ia m also attaching a picture of the 3/4" fitting in a cut out valve so you can see how they seal.
Patent Pending
Set of 3- 1/2" Hard Anodized Aluminum Backflow Test Fittings
Set of 3- 1/2" Hard Anodized Aluminum Backflow Test Fittings
Our Price: $34.95

Set of 3 - 1/2" Hard Anodized Aluminum Backflow Test Fittings. My fittings are the best quality fitting that are made. I am the original designer of the quick test fittings and worked to improve them through the years. The other companies are still using the original design that they copied from me. The hard anodizing creates a surface that is second only to diamond in hardness. They look similar to the regular anodized fittings but are darker in color. I have also increased the size of the o-ring and added a recessed shoulder for the o-ring. It really makes them seal a lot easier. Made in the United States.

3 - 1/4" Aluminum Hard Anodized Backflow Test Fittings in Holder
3 - 1/4" Aluminum Hard Anodized Backflow Test Fittings in Holder
Our Price: $34.95

3 - 1/4" Aluminum Hard Anodized Test Fittings in a Holder

QT150B - Set of 3 Brass 1/2" Backflow Quick Test Fittings
QT150B - Set of 3 Brass 1/2" Backflow Quick Test Fittings
Our Price: $39.95

Set of 3 Brass 1/2" Backflow Quick Test Fittings . Redesigned to have a larger o-ring on them which makes them seal easier. My fittings are the best quality fittings that are made. I am the
original designer of the quick test fittings and worked to improve them
through the years. The other companies are still using the original
design that they copied from me. Made in the United States which allows me to keep control of the quality of the fittings.
3 - 1/4" Brass Backflow Test Fittings in a Holder
3 - 1/4" Brass Backflow Test Fittings in a Holder
Our Price: $39.95

3 - 1/4" Brass Backflow Test Fittings in a Polyurethane Holder.

Set of 3 -1/2" EZ Test Aluminum Backflow Fittings
Set of 3 -1/2" EZ Test Aluminum Backflow Fittings
Our Price: $39.95

Set 3 New 1/2" EZ Test Backflow fittings. Hard Anodized Aluminum. These fittings are a big improvement in test fittings as they seal at the bottom of the test cock not at the top.
Set of 3 - 3/4" Hard Anodized Aluminum Backflow Test Fittings
Set of 3 - 3/4" Hard Anodized Aluminum Backflow Test Fittings
Our Price: $44.95

Set of 3 - 3/4" Hard Anodized Aluminum Backflow Test Fittings. The hard anodizing creates a surface that is second only to diamond in hardness. They look similar to the regular anodized fittings but are a darker green in color. They have been redesigned to use a larger o-ring which is recessed and allows them to seal easier. The hard anodizing should wear better than brass and 1/2 the weight of the brass backflow test fittings.
QT175B - Set of 3 Brass 3/4" Backflow Quick Test Fittings
QT175B - Set of 3 Brass 3/4" Backflow Quick Test Fittings
Our Price: $49.95

Set of 3 Brass 3/4" Backflow Quick Test Fittings. Redesigned with a larger o-ring which makes them seal easier. Made in the United States not over seas like the other ones on the market. . My fittings are the best quality fittings that are made. I am the original designer of the quick test fittings and worked to improve them through the years. The other companies are still using the original design that they copied from me.