Company Info


Home > Wrenches > Test Fittings
Choose a sub category:
Brass Aluminum
Sort By:
Page of 1
1/4" Hard Anodized Aluminum Backflow Test Fittings - Set of 3 Set of 3- 1/2" Hard Anodized Aluminum Backflow Test Fittings Set of 3 - 3/4" Hard Anodized Aluminum Backflow Test Fittings
My fittings are the best quality fittings you can buy and are made in the United States. These look the same as the previous 1/4" aluminum backflow test fittings except the color is darker, but that's were it stops as the Hard Anodizing absorbs into the Aluminum and creates a surface that is only second to diamond in hardness.
There is no reason to spend the extra money on brass fittings. These should out wear the brass fittings at less cost and less weight plus the color makes them easier to see so your less likely to leave them behind.
Also my new fittings have a larger O-ring as you can see in the photo and a recessed groove in the fitting for the o-ring to sit in which makes sealing easier. The space capsules are made out of aluminum that is not much thicker than a piece of paper to save weight. To give them the strength they need for takeoff and reentry they hard anodize the aluminum.
.
Set of 3 - 1/2" Hard Anodized Aluminum Backflow Test Fittings. My fittings are the best quality fitting that are made. I am the original designer of the quick test fittings and worked to improve them through the years. The other companies are still using the original design that they copied from me. The hard anodizing creates a surface that is second only to diamond in hardness. They look similar to the regular anodized fittings but are darker in color. I have also increased the size of the o-ring and added a recessed shoulder for the o-ring. It really makes them seal a lot easier. Made in the United States.

Set of 3 - 3/4" Hard Anodized Aluminum Backflow Test Fittings. The hard anodizing creates a surface that is second only to diamond in hardness. They look similar to the regular anodized fittings but are a darker green in color. They have been redesigned to use a larger o-ring which is recessed and allows them to seal easier. The hard anodizing should wear better than brass and 1/2 the weight of the brass backflow test fittings.
Set of 9 Hard Anodized Aluminum Backflow Test Fittings with a Holder 3 - 1/4" O'Rings for Quick Backflow Test Fittings 3 - 1/2" O'Rings for Quick Test Backflow Fittings
Set of 9 Hard Anodized Backflow Test Fittings (3-1/4") (3-1/2")(3-3/4") in a holder. These fittings look the same as the regular anodized fittings but the hard anodizing creates a surface that is only second to diamond in hardness.
My new fittings also have a larger O-ring that makes sealing easier and a recessed groove for the o- ring to seal on. They are in a polyurethene holder. Made in the United States which allows me to keep control of the quality of the fittings. The holder helps to keep you from leaving them at a job site as you can see your missing something right away with the blank holes and helps to protect
them. Rolling around in your tool box or pocket is very hard on the threads and usually leads to wearing out much faster. Most testers don't have to replace the fittings if they are kept in the holder.

Set of 3 1/4" O'Rings for Aluminum or Brass Backflow Quick Test Fittings
Set of 3 1/2" O'Rings for Aluminum or Brass Backflow Quick Test Fittings
3 - 3/4" O'Rings for Quick Backflow Test Fittings QT125B - Set of 3 (1/4")  Brass Backflow Quick Test Fittings QT150B - Set of 3 Brass 1/2" Backflow Quick Test Fittings
Set of 3 3/4" O'Rings for Aluminum or Brass Backflow Quick Test Fittings
Set of (3) 1/4" Brass Backflow Quick Test Fittings. My fittings are the best quality fittings that are made. I am the original designer of the quick test fittings and worked to improve them through the years. The other companies are still using the original design that they copied from me. The thickness of the o-ring has been increased and the groove it sits in has been changed which leads to easier sealing. Made in the United States so I can keep control of the quality of the fittings.

Set of 3 Brass 1/2" Backflow Quick Test Fittings . Redesigned to have a larger o-ring on them which makes them seal easier. My fittings are the best quality fittings that are made. I am the
original designer of the quick test fittings and worked to improve them
through the years. The other companies are still using the original
design that they copied from me. Made in the United States which allows me to keep control of the quality of the fittings.
QT175B - Set of 3 Brass 3/4" Backflow Quick Test Fittings QT200B - Complete Set of (9) Brass Backflow Quick Test Fittings with Holder 3 Fitting - Backflow Test Fitting Holder
Set of 3 Brass 3/4" Backflow Quick Test Fittings. Redesigned with a larger o-ring which makes them seal easier. Made in the United States not over seas like the other ones on the market. . My fittings are the best quality fittings that are made. I am the original designer of the quick test fittings and worked to improve them through the years. The other companies are still using the original design that they copied from me.

Complete set of 9 Brass Backflow Quick Test Fittings in a polyurethane Holder. (3) 1/4", (3) 1/2), (3) 3/4" . These are all redesigned to use the larger o-ring for improved sealing.Made in Oregon not overseas.

3 Fitting 1/4" Holder. Made of Polyurethane. This holder is for the QT Fittings, not the EZ Fittings. It will work but the fittings do not
go in all the way.
3 - 1/4" Brass Backflow Test Fittings in a Holder COMPLETE SET OF 9 EZ TEST ALUMINUM BACKFLOW TEST FITTINGS IN A HOLDER 3 - 1/4" Aluminum Hard Anodized Backflow Test Fittings in Holder
3 - 1/4" Brass Backflow Test Fittings in a Polyurethane Holder.


Set of (3) -1/4", (3) -1/2", (3) 3/4"- EZ Test Backflow Fittings in a Holder - Hard Anodized Aluminum
The fittings are anodized in different colors to make them harder to leave behind when your done.

3 - 1/4" Aluminum Hard Anodized Test Fittings in a Holder